OVERVIEW

PRODUCTS

SPECS

OVERVIEW

Conproco sealers are a range of specialized products designed for the protection and preservation of various types of surfaces. These sealers are known for their high-quality formulations and their ability to enhance the durability and longevity of different substrates. The primary purpose of Conproco sealers is to provide a protective barrier against moisture, chemicals, stains, and other potentially damaging elements. They can be applied to a wide range of surfaces, including concrete, masonry, natural stone, and more. One key feature of Conproco sealers is their ability to penetrate deep into the substrate, creating a long-lasting bond that helps to prevent water infiltration and the deterioration caused by freeze-thaw cycles. This makes them particularly suitable for outdoor applications where exposure to harsh weather conditions is a concern.

PRODUCTS

K-88 Admix

Primer

Promotes curing: Reduces need to moist cure materials in conditions up to 85°F. Reduces shrinkage induced cracking.
Increases bond: Promotes chemical adhesion to substrate.
Durability: Increases compressive and tensile strengths. Increases freeze/thaw resistance.
Water resistance: Increases density and improves resistance to water entry.

Single component: No mixing, no waste.
Long open time: Apply up to 72 hours before placing covering material.
Color trigger: Pink when applied, turns orange when ready for covering material – about 30 minutes.
Alkali trigger: Alkalinity of cement causes material to react.
Breathability: Water vapor permeable.
Non re-emulsifying: Once cured will not be affected by water.
Environmentally friendly: Water based, low odor, non-flammable.
Easy to use: Spray with low pressure or airless sprayer.

Shield MX

Maximum protection: Passes ASTM E514. 100% no leakage. 94% reduction in water absorption.
Long term protection: Advanced silicone technology.
Environmental protection: Mitigates carbonation. Effective chloride ion screen. UV stable. Unaffected by microbiological activity.
Breathability: Water vapor permeable.
Clear result: Will not darken or alter light reflection of substrate when properly applied to a dry and untreated surface.
Cold weather application: Apply to 40°F or above. With 1-hour cure will tolerate sub-freezing temperatures with no effect. Substrate should be frost-free.
Increases durability: Repels water from penetrating substrate. Most damage to concrete, masonry and stone is due to water entry.
Environmentally friendly: Water-based technology, low odor, easy handling and clean up.
VOC compliant: Meets all current VOC emission standards for waterproofing, concrete/masonry sealer.

SPECS

Conpro Primer
File Size:	87 kb
File Type:	pdf

Download File

---

Foundation Coat
File Size:	95 kb
File Type:	pdf

Download File

---

K-88 Admix
File Size:	87 kb
File Type:	pdf

Download File

---

Shield MX
File Size:	147 kb
File Type:	pdf

Download File

---

SEALERS

---

Euclid
Clemons
Prosoco
V Seal
​Conproco

Have a Question?
Contact Us